Install BDM

From OBD Tuning Wiki
Revision as of 11:29, 24 June 2014 by Jason (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Installation of the software for OptiCan products.

  1. Go to the offical OBD Tuning website (
  2. Click on the OBD Tuning GmbH button.
  3. Select Downloads in the submenu.
  4. Download the following data.
    • OptiCan Installer
    • Driver
    • the best thing is if you save the downloaded data on your desktop so you can easily find it again.
  5. Go to the control panel. you can find it if you press on the home button
  6. now select System.
  7. now press on hardware and select the device manager.
  8. press the + at USB Controller
  9. now connect your device to the computer.
  10. now another menu point should be available. Please right click this new menu point
  11. now you have to press the update driver button
  12. the hardwareupdate assistant will open itself and then you have to select following things
  13. No
  14. Install from a list or a specific location
  15. Don't search, I will choose the driver to install
  16. Continue
    • continue with the installation.
    • go to where you have saved the data and select the 32bit or 64bit version.
    • press on complete
  17. Now open the OptiCan Installer Data which you downloaded.
  18. Select the menu point BDM and press the button Update/Install
  19. Now you have installed the BDM and you just have to press on the green car Icon on your desktop to start the application